1, press the "switch" in the green button, power on.

2, slowly adjust "vibration intensity adjusting knob, clockwise twist, the tray together with" the vibration bracket "began to shake, finishing touch disc by hand, feel to adjust to a certain oscillation intensity.

3, the powder capsule will be put into the shell powder capsule shell finishing disk, each about 300 tablets. Put the cap of the capsule into the capsule cap cover tray, about 300 tablets each time. The finishing plate is made of an organic glass plate, and a plurality of upper and lower small funnel type circular holes are drilled.

4, about 30 seconds, powder capsule capsule and capsule cap that fall into the hole, the opening up. In case of the opening of the individual, the cap can be used to gently press the cover cap, you can set out.

5, the level of handheld powder capsule shell board (shown in the end draw, have random ready plate in a hole), in order to gently push the bottom plate, finishing powder capsule shell will be installed after the fall down plate hole, then remove the connecting plate. In the same way, take out the cap of the capsule cap with a cap cap cap.

6, prepare a bottom area of 500 x 500mm2, four high about 10mm square filled with powder, powder, powder capsule shell plate will be flat on the side plate in powder. The organic glass box cover in the random distribution of the powder capsule on the connecting plate, with a small shovel powder into the box, with the edge of the frame can be filled with a scratch, powder, and the excess powder off.

7, with a random matching cap cap cap set on the capsule cap cap board, there is a hole, it is easy to place. Flip the capsule cap plate, the capsule opening down, the installed powder powder capsule shell plate, is also very easy to set the alignment hole.

8, the board has been set into the capsule cavity capsule cap molding board below, hand pulled downwards "bar" and in place, need not worry too much force, because of the high pressure under the control of a positioning mechanism. Remove the cover plate capsule, capsule can be poured out.

Automatic capsule filling machine, suitable for medicine plant, small and medium sized pharmaceutical companies, health care products factory, hospitals, clinics and other small batch production, good sealing, frequency conversion stepless speed regulation, convenient operation, high efficiency, accurate Capsule on device, small volume, low energy consumption, high yield, product standardization, serialization and maintenance easy maintenance, low power consumption, economical and practical, its performance has reached the world advanced level, completely accords with GMP standard.

For more information about capsule filling machine, automatic capsule filling machine, please see: www.rarjjx.com