Automatic glue filling machine automatic feeding Xiang how to deal with:

Zhejiang Rijin Xiang glue filling machine of the operation of the machine, in the first, two position on the capsule material barrel will send into capsule plate through the vertical capsule funnel alternately, the horizontal fork is pushed to the correct block outer side, then the vertical vacuum suction along the die hole again, the action of the vacuum suction under the cap, and separated; third station in orbit under the action of modules decreased and outward; fourth pellets filling station, pellets in the hopper through the upper and lower switch plate opening and closing movement, the pellets into the capsule body under the module; fifth bit transition station sixth station with gas blowing pipe; defective capsule cap removed failed to separate, and blew into the waste capsule collection bucket; seventh station under the module in orbit under the action of moving inward and upward; eighth position locking rod in the cam The utility model is characterized in that the utility model is used for locking the capsule which is filled with the lifting device under the action of the cam, and the ninth position discharging push rod increases the locked capsule to be collected under the action of the cam, and the tenth position cleaner can clean the mold hole and then enter the next cycle again.

    Zhejiang Rijin Xiang glue filling machine: www.rarjjx.com