WELCOME TO OUR WEB ! 中文版  |  ENGLISH  |  TEL:0086-577-65026633
HOME ABOUT US PRODUCTS WORKSHOP NEWS FEEDBACK CONTACT US
1 2
 
 
 
Capsule filling machine
Capsule polishing machine
Capsule counting machine
mould
packing machine mold
 
 
 
 
  Input Keywords :
 
 
 
 
Add:浙江省瑞安市南滨街道云江标准厂房1号3楼
Tel:0577-65026633
Fax:0577-65025533
Contact:
Mr.Guo 13396969696
Mr.Xu 13388560288
Web:www.rarjjx.com
 
 
 
Maintenance of Vacuum Separator for Automatic Capsule Filling Machine
Hits: 4359  Time: 2017/7/4 14:56:23
 
Automatic capsule filling machine vacuum separator maintenance We usually need to pay attention to what, how to maintain it? Here we Ryan Rizhao machinery to let you know.
     Vacuum system vacuum separator in the vacuum capsule in the filling of the main play the capsule into the upper and lower modules and the cap, the role of separation, if the capsule can not cap, body separation, the subsequent filling will not be possible. Automatic capsule filling machine turntable every operation of a station, the machine spindle rotation of a week, automatic capsule filling machine vacuum separator under the action of the cam on the next movement next time.
 
If the capsule cap, body separation is not smooth, should check the vacuum separator between the upper plane and the lower plane of the gap between the module, the gap is too large vacuum system vacuum can not reach the cap, body separation required vacuum, The gap is too small and prone to knock to make the next module deformation. When the position of the vacuum separator needs to be adjusted, use the handle to rotate the main motor shaft of the automatic capsule filling machine so that the vacuum separator is raised to the highest position, loosen the locking nut at both ends of the adjusting rod under the machine table, Vacuum the height of the separator, then lock the nut and turn the main motor shaft test with the handle until it is appropriate. Vacuum degree in the machine operation panel vacuum table read out, when the vacuum is too high may be appropriate to open the vacuum control valve, the vacuum is too low can be turned off or close the vacuum control valve. Automatic Capsule Filling Machine Vacuum system filters should be cleaned regularly to clean up clogged dirt to ensure that the vacuum system has sufficient vacuum.
 Ruian City, Japan into the machinery plant to produce automatic capsule filling machine and follow-up polishing, tick waste, a few tablets, filling and other series of equipment-based products selling more than 30 domestic provinces, municipalities and autonomous regions and Taiwan, Hong Kong, and so on Regions, and exported to Asia, Europe, the United States more than 40 countries, won the good reputation of customers, and establish a good corporate image.
Enterprise official website: www.rarjjx.com
Contact:Mr.xu 13388560288   Mr.Guo 13396969696 Tel:0577-65026633 Fax:0577-65025533 Add:浙江省瑞安市南滨街道云江标准厂房1号3楼
Ruian rijin machinery factory  Web:www.rarjjx.com