For automatic capsule filling machine, we usually need to pay attention to what norms and maintenance methods, the following small tape with you to further understand.

1. When the machine is working for a long time, it is necessary to clean up parts parts that are in direct contact with the powder. When the machine is to be replaced or the time is longer, it is necessary to clean up.

2. The lower part of the machine transmission parts should always wipe the oil, so that the observation operation more clearly.

3. Vacuum system filters should be cleaned regularly to clean up clogged dirt.

4. Machine lubrication.

5. The working surface of the cam wheel is coated with grease every week.

6. The next joint of the machine under the joint bearing to drip oil lubrication;

7. A variety of bearings to be regularly or according to the operation to be cleaned, adding grease, sealed bearings can be oil lubrication;

8. Drive chain to check once a week tightness, and coated with oil or grease;

9. The main drive reducer and feed reducer every month to check the amount of oil, when not enough time to refuel, every six months to replace a lubricant;

10. Clean the office every time in a dry normal state.

Ruian City, the new machinery, the Company to produce automatic capsule filling machine and follow-up polishing, tick waste, a few tablets, filling and other series of equipment-based, best-selling products more than 30 provinces, municipalities and autonomous regions and Taiwan, Hong Kong, And other regions, and exported to Asia, Europe, the United States more than 40 countries, won the good reputation of customers, and establish a good corporate image.